Redding Type S Match Bushing Full Die Set 6.5mm GAP 4S

$299.99

Purchase & earn 300 points!

Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding.

Uses the same interchangeable bushings (.001 in. increments) as those used in our bushing style neck sizing dies.

The adjustable decapping rod allows you to adjust the bushing position sizing only part of the neck length when desired.

Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case.

All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S Bushing Style Neck Sizing Dies.

Note: By removing the bushing and all internal parts the Type S full bushing may also be used as a body die

All dies are supplied without bushings